Need help?Do you have a question about the Gsertel RCS 400 and is the answer not in the manual?
General| Brand | Gsertel |
|---|---|
| Model | RCS 400 |
| Category | Microphone |
| Language | English |
Covers frequency, resolution, tuning, inputs, outputs, spectrum analyzer, RF analysis.
Details Service Bitrate, Table Bitrate, PID Bitrate, Captures, Network Delay, Tree View, Table Repetition, PCR Jitter.
Details RF input, ASI IN/OUT, REF, TSoIP, Control, HDMI, USB, Power Supply, Fuses, On/Off, GPS.
Covers rack placement, power, internet connection, and turning on the device.
Details default username 'admin' and password 'rcs' for first-time access.
Configure network parameters, date, hour, measure units, SNMP.
Manage administrator, technician, viewer users, and their permissions.
Automatic check via USB flash drive or internet connection.
Update via file, initiate update, and clear browser cache after update.
Enables/disables RF, ASI, IP inputs/outputs via matrix.
Select, delete, export/import RF channel plans, assign alarm profiles.
Select, create, delete, edit, import/export IP channel plans.
Backup configuration, restore data, save and load RCS parameter settings.
Set up alarms for RF, ASI, IP, ETR290, Services, PID Blacklist, QoS.
TS Rec., Active, Type, Trap controls; alarm generation logic and thresholds.
Provides a global view of the selected input status on a single screen.
Spectrum, Transport services, Mosaic, Measurements, Alarms sections.
Details packet arrival, IP payload, UDP payload bitrates, and loss rates.
Displays bitrate graph, T2-MI measurements, and PLP monitoring.
Comprehensive analysis of input signal, same screen for RF, ASI, IP.
Detailed bitrate values for channel services, graph and list.
Represents PCR jitter and interval graphs with thresholds.
Create templates for services, monitor PIDs, detect changes and trigger alarms.
Instant recording and Event Recording (alarm-triggered).
Create templates by selecting parameters or loading from source for T2MI signals.
Displays evolution of measurements (Power, C/N, MER etc.) over time.
Shows constellation of RF signal and real-time RF measurements.
To Next Page
