Chapter 2 - Installation
DIP Switches Audiogram Format
Dip switch 1 Selection
OFF Separate Left and Right Audiograms
ON Overlaid Left and Right Audiograms
Printer Color
Dip switch 2 Selection
OFF Color Printing
ON Black and white Printing
Dip switch 3 Not Used.
Print Bar Code
Dip switch 4 Selection
OFF Print bar code
ON Do not print bar code
Parallel Port The Remote/Printer board has a standard “PC-type” parallel printer port. The printer
is connected to this port with a standard “PC-type” parallel printer cable.
User Interface
Printing Pressing the PRINT AUDIOGRAM pushbutton on the front panel of the GSI 61
will send the stored threshold data to the printer. If turned ON, a bar code will be
printed with the audiogram. The bar code can be used to quickly input data with
AudioScan systems.
Cancel the Print Printing may be cancelled by pressing the PRINT AUDIOGRAM pushbutton a
second time while the “Printing” message is displayed. A “Printing Cancelled”
message will then flash on the display.
Multiple Copies Additional copies of the audiometric test results are printed each time the PRINT
AUDIOGRAM pushbutton is pressed, after the “Printing” message disappears from
the display.
Instrument
Operation The GSI 61 remains operational while printing with the following exceptions: pressing
while Printing
the Data Erase, Save, Data Transfer and Remote pushbuttons will result in the
error message “Invalid Selection.”
Remote Operation/
The Remote port operation is inactive while audiometric test results are being printed.
RS 232 or USB Interface
2-19
1761-0100 Rev. B
To Next Page
Loading...
