Do you have a question about the GSL MPPT30-1 and is the answer not in the manual?
MPPT stands for Maximum Power Point Tracker, a converter that maintains PV voltage for maximum power to the load or battery.
Suitable for new low-cost grid panels and offers less interference with more accurate voltage readings.
Details daily load capacities for 12V, 24V, and 48V systems based on panel wattage.
Explains potential interference and provides steps like reorienting aerials, grounding, and using ferrite clamps.
Addresses the cost barrier of MPPTs in standalone systems and highlights GSL's solution.
Recommends deep cycle batteries, at least 180AH, for solar systems to handle cyclical use.
Explains how temperature affects PV voltage and current gain, noting a 20% gain at 40C.
MPPT outperforms conventional regulators above 3% of nominal panel power; lower output below 3%.
| Model | GSL MPPT30-1 |
|---|---|
| Category | Battery Charger |
| Input Voltage Range | 12V/24V Auto |
| Output Voltage | 12V/24V |
| Max Output Current | 30A |
| Max. PV open circuit voltage | 100V |
| MPPT Tracking Efficiency | >99% |
| Weight | 1.5kg |
| Protection Features | Reverse Polarity |
| Cooling | Natural Convection |
Loading...