20
Leakage or Damage of Vibration Damper
Steps on with foot to the vehicle forehead, compress several times, inspect
its movement, and whether or not any oil leak, damage, loose or unusual sound;
Steps on with foot to the vehicle back position, compress several times, inspect its
its movement, and whether or not any oil leak, damage, loose or unusual sound
Transmission System
Transmission case leakage and capacity
Stop the engine and take down oil position screw. If oil level reach at standard position it is OK;
otherwise pour in oil.
OIL TYPE：85W-140 or 15W/35S
Put on oil position screw after checking airproof gasket
Replacement of lubricating oil
Take down oil position screw
Take down vent bolt and put oil out
Put on vent bolt with revolving
Pour oil according to standard value：
Attention! Make sure that ground is plainness.
Oil position screws
Air proof
gasket
Attention! Make sure that no damage in airproof gasket
To Next Page
Loading...