+ This video applies to assembling most
GT hardtail mountain bikes equipped
with rim brakes.
+ First, open the box with a screwdriver.
Be careful of the staples. Pull the seat
out and set it aside for later.
TOOLS NEEDED
GETTING YOUR
BIKE READY FOR
ASSEMBLY
Inside the box, you’ll find a smaller
box of parts, tools and manuals.
Once you have assembled the bike,
but before you ride, please read the
owner’s manual.
• Pliers or Screwdriver
• Philips head Screwdriver
• Boxcutter
• Cable Cutters or Scissors
• Torque Wrench
• Allen keys
• Pedal Wrench
SETUP STEP 1 STEP 2 STEP 3 STEP 4 CONGRATS!
+
+
+ First, remove the front wheel from the
packaged bike by removing the zip
ties and/or velcro. Then remove all
additional packaging.
+ Lift the bike up and set the rear wheel
inside of the box, with the fork hanging
off the frame.
To Next Page
Loading...
