+ This assembly video applies to all LTS
platform full suspension bikes.
+ Open the box with a screwdriver.
Be careful of the staples.
TOOLS NEEDED
GETTING YOUR
BIKE READY FOR
ASSEMBLY
Inside the box, you’ll find a smaller
box of parts, tools and manuals.
Once you have assembled the bike,
but before you ride, please read the
owner’s manual.
• Pliers or Screwdriver
• Philips head Screwdriver
• Boxcutter
• Cable Cutters or Scissors
• Torque Wrench
• Allen keys
• Pedal Wrench
• Force
• Sensor
SETUP STEP 1 STEP 2 STEP 3 STEP 4 CONGRATS!
+
+
+ Remove the front wheel from the
packaged bike by removing the zip ties
or velcro. Then remove all additional
packaging.
+ Set the bicycle down with the rear
wheel inside the box and the fork
hanging off the front.
To Next Page
Loading...
