1. Remove the four bolts that connect the faceplate
to the stem. The stem is what connects the
handlebar to the fork. Set your bolts and faceplate
in a safe place, so you don’t lose them.
2. Place the handlebar onto the stem. Ensure the
brake and shifter cables are not twisted or kinked.
3. Center the handlebar in the stem using the
markings on the bar.
Roll the handlebar back into a comfortable
position, then hand-tighten the stem bolts using
the Allen key. We’ll tighten them properly later.
4. Ensure the gap between the faceplate and stem is
equal all the way around the handlebar.
STEP 1
INSTALL
HANDLEBARS
1
1
3
4
2
SETUP STEP 1 STEP 2 STEP 3 STEP 4 CONGRATS!
To Next Page
Loading...
