GTAKE GK600-4T11G/15LB - User Manual

Preface
Thank you for choosing GTAKE GK600 Series General Purpose AC Motor Drives. This user
manual presents a detailed description of GK600 series with respect to product features,
structural characteristics, functions, installation, parameter setting, troubleshooting,
commissioning and daily maintenance, etc. Be sure to carefully read through the safety
precautions before use, and use this product on the premise that personnel and equipment
safety is ensured.
IMPORTANT NOTES
 Please assure the intactness of product enclosure and all safety covers before
installation .Operation must conform to the requirements of this manual and local industrial
safety regulations and/or electrical codes.
 Contents of this manual may be subject to appropriate modification as a result of product
upgrade, specification change and update of the manual.
 In the event of damage or loss of user manual, users may ask local distributors, offices or
our Technical Service Department for a new one.
 If any item as stated in this manual is not clear, please contact our Technical Service
Department.
 If any anomaly occurs after power up or during the operation, it is essential to stop the
machine and identify the fault or seek technical services as soon as possible.
 Telephone number of our Technical Service Department: +86-755-86396685.

Summary

Chapter 1 Safety Precautions

Safety Considerations

Covers guidelines for safe installation, operation, and maintenance to prevent injury and equipment damage.

Chapter 2 Product Information

Technical Features of GK600

Details the technical specifications of the GK600 series, including power input, output, and control characteristics.

Appearance, Mounting Dimensions and Weight

Provides illustrations and dimensions for various models, essential for physical installation planning.

Chapter 3 Installation and Wiring

Installation Environment

Minimum Mounting Clearances

Main Circuit Terminals and Wiring

Explains the layout and connection procedures for main power and output terminals, emphasizing safety.

Control Terminal Wiring

Covers wiring diagrams and specifications for control terminals, essential for connecting external control signals.

Chapter 4 Operation and Run Instructions

Operation of Control Panel

Describes how to use the control panel, including key functions, indicators, and display statuses.

First-time Power up

Outlines the step-by-step procedure for initial power-up and motor configuration, crucial for safe startup.

Chapter 5 List of Parameters

Group A: System Parameters and Parameter Management

Group b: Run Parameter Setting

Group C: Input and Output Terminals

Group d: Motor and Control Parameters

Provides parameters for motor 1 and motor 2, including V/f and vector control settings.

Group E: Enhanced Function and Protection Parameters

Group F: Application

Group H: Communication Parameters

Chapter 6 Specification of Parameters

Group A System Parameters and Parameter Management

Group b Run Parameter Setting

Group C Input and Output Terminals

Group d Motor and Control Parameters

Lists parameters for motor 1 and motor 2, including V/f and vector control settings.

Group E Enhanced Function and Protection Parameters

Group F Application

Chapter 7 Troubleshooting

Fault Causes and Troubleshooting

Provides a table of fault codes, their causes, and corresponding solutions for diagnosing issues.

GTAKE GK600-4T11G/15LB Specifications