GTAKE GK600 Series - User Manual

Preface
Thank you for choosing GTAKE GK600 Series General Purpose AC Motor Drives. This user
manual presents a detailed description of GK600 series with respect to product features,
structural characteristics, functions, installation, parameter setting, troubleshooting,
commissioning and daily maintenance, etc. Be sure to carefully read through the safety
precautions before use, and use this product on the premise that personnel and equipment
safety is ensured.
IMPORTANT NOTES
 Please assure the intactness of product enclosure and all safety covers before
installation .Operation must conform to the requirements of this manual and local industrial
safety regulations and/or electrical codes.
 Contents of this manual may be subject to appropriate modification as a result of product
upgrade, specification change and update of the manual.
 In the event of damage or loss of user manual, users may ask local distributors, offices or
our Technical Service Department for a new one.
 If any item as stated in this manual is not clear, please contact our Technical Service
Department.
 If any anomaly occurs after power up or during the operation, it is essential to stop the
machine and identify the fault or seek technical services as soon as possible.
 Telephone number of our Technical Service Department: +86-755-86396685.

Summary

Chapter 1 Safety Precautions

1.1 Safety Considerations

General safety guidelines and considerations for product installation and use.

1.1.3 Wiring

Crucial safety warnings and guidelines for wiring the drive correctly.

1.1.5 Maintenance

Safety guidelines for performing maintenance and troubleshooting on the drive.

Chapter 3 Installation and Wiring

3.6 Main Circuit Terminals and Wiring

Detailed instructions and warnings for connecting the main circuit terminals of the drive.

Chapter 4 Operation and Run Instructions

4.1 Operation of Control Panel

Overview of the control panel as the primary interface for receiving commands and displaying parameters.

4.1.1 Key Functions on Control Panel

Details the functions of each key on the drive's control panel for operation and parameter access.

4.1.4 Setting Method of Parameters

Provides a systematic approach to setting and modifying drive parameters.

4.2 First-time Power up

A flowchart guiding the user through the initial power-up and setup process for the drive.

Chapter 5 List of Parameters

Group b: Run parameter setting

Parameters related to setting up the drive's operational modes, such as frequency and start/stop control.

Group d: motor and control parameters

Parameters specific to configuring the motor and its control characteristics.

Chapter 6 Specification of Parameters

Group b Run Parameter Setting

Group b0 Frequency Setting

Parameters specifically for configuring frequency settings and related behaviors.

Group b1 Start;Stop Control

b1-00 Run command

Selects the source for the run command (control panel, terminal, or communication).

Group b2 Accel;Decel Parameters

b2-12 Accel;Decel curve

Group d Motor and Control Parameters

Group d0 Parameters of Motor 1

Configuration parameters specifically for Motor 1, covering type, ratings, and electrical characteristics.

d0-22 Autotuning of motor 1

Initiates and configures the autotuning process for Motor 1 to automatically identify parameters.

Group d2 Vector Control Parameters of Motor 1

d2-01 ASR high-speed proportional gain Kp1

Sets the proportional gain for the Automatic Speed Regulator (ASR) at high speeds.

d2-02 ASR high-speed integration time Ti1

Sets the integration time for the ASR at high speeds.

d2-03 ASR low-speed proportional gain Kp2

d2-04 ASR low-speed integration time Ti2

Group E1 Protection Parameters

E1-00 Overvoltage stall

Group F1 Multi-step frequency

Group F2 Simple PLC

F2-00 Simple PLC run mode

Group F3 Wobble Frequency and Fixed Length Count

F3-00 Wobble frequency function setting

F3-01 Wobble frequency run setting

Chapter 7 Troubleshooting

7.1 Fault Causes and Troubleshooting

Identifies common faults, their causes, and provides solutions for troubleshooting.

3 oC3 Decel overcurrent

8 tUN Autotuning failed

10 oL2 Motor overloaded

Chapter 8 Maintenance

8.1 Routine Inspection

8.2 Regular Maintenance

Guidelines for performing regular maintenance tasks every 3-6 months to prevent potential faults.

8.3 Replacement of Vulnerable Parts

GTAKE GK600 Series Specifications

General

Brand	GTAKE
Model	GK600 Series
Category	DC Drives
Language	English