Guardian Plus GSVH1K User Manual

VB0061
HEPA Filtration
and Fresh Air
Ventilation*
GSVH1K
INSTALLATION INSTRUCTIONS MANUAL
RESIDENTIAL USE ONLY
INSTALLER: LEAVE THIS MANUAL WITH CONSUMER.
www.guardianplusairsystems.com
www.Broan-NuTone.com
04326 rev 3
*Patents pending
HEPA Filtration,
Fresh Air and
Heat Recovery
Ventilation*
GSHH3K
HEPA Filtration,
Fresh Air and
Energy Recovery
Ventilation*
GSEH3K
HEPA
Filtration*
GSFH1K

Guardian Plus GSVH1K Specifications

General

Brand	Guardian Plus
Model	GSVH1K
Category	Fan
Language	English

Summary

1. BEFORE STARTING

1.1 INSPECT THE CONTENT OF THE BOX

Inspect unit contents for shipping damage and ensure all parts are present before installation.

4. PLANNING THE INSTALLATION

4.1 PLANNING OF THE DUCTWORK

6. INSTALL THE UNIT

6.1 TOOLS AND MATERIALS

List of necessary tools and materials for installing the unit.

6.2 MOUNT THE PORTS ON THE UNIT

6.4 FOR SUSPENDED APPLICATIONS

6.5 INSTALLING 8" DUCTS AND REGISTERS

Detailed steps for connecting 8-inch ducts and registers to the unit.

6.6 INSTALLING INSULATED FLEXIBLE DUCTS TO TANDEM® TRANSITION

6.7 INSTALLING AIRDUOTM EXTERIOR HOOD

6.8 INSTALLING TWO EXTERIOR HOODS

6.10 CONNECTION TO THE 5” TO 6” OVAL PORTS OF THE UNIT

6.11 CONNECTING THE DRAIN (GSHH3K MODEL ONLY)

6.12 LOW TEMPERATURE APPLICATIONS BELOW FREEZING (32°F OR 0°C)

Procedures for protecting the unit and ductwork in sub-freezing temperatures.

7. CONTROLS

7.1 MAIN SWITCH

7.2 WALL CONTROLLERS (ONE PROVIDED WITH THE UNIT)

Overview of the available ACCGSC1 and ACCGSC3 wall controllers for unit operation.

7.4 INSTALLATION OF THE WALL CONTROLLERS (BOTH MODELS)

Step-by-step guide for installing the wall controllers, including wiring.

7.5 OPERATING ACCGSC1 CONTROLLER

Detailed instructions on how to operate the ACCGSC1 wall controller.

7.6 OPERATING ACCGSC3 CONTROLLER

Detailed instructions on how to operate the ACCGSC3 wall controller.

8. BALANCING PROCEDURE (GSVH1K, GSHH3K AND GSEH3K UNITS ONLY)

8.1 WHAT YOU NEED TO BALANCE THE UNIT

8.2 PRELIMINARY STAGES FOR BALANCING THE UNIT

8.4 BALANCING PROCEDURE

The step-by-step process for balancing the airflow using a magnehelic gauge.

9. MAINTENANCE

9.1 SEMI-ANNUAL MAINTENANCE (ESSENTIAL)

Essential maintenance tasks to be performed every six months, including filter replacement.

9.2 ANNUAL MAINTENANCE (ESSENTIAL)

Annual maintenance procedure, including full HEPA filter cartridge replacement.

9.3 MASTER RESET

10. TROUBLESHOOTING

11. WARRANTY