To Next PageTo Next PageWhat to do if my Guardian Air Cleaner does not operate?
If your Guardian Air Cleaner isn't turning on, first ensure it's properly plugged into a working outlet. Next, check that the filter is correctly installed. If the problem persists and you have a Genuine Replacement Filter, try installing it. If none of these steps work, further assistance may be needed.
Why does my Guardian AC4300 Air Cleaner shut off unexpectedly?
If your Guardian Air Cleaner is unexpectedly shutting off, verify that it is plugged into a functioning electrical outlet. Also, check that the HEPA filter and the rear cover are firmly latched in place. If the issue continues, it might require further inspection.
What to do if no air is circulating from my Guardian AC4300?
If your Guardian Air Cleaner isn't circulating air, unplug the unit first. Then, inspect both the Pre-/Carbon and HEPA filters. If the Pre-/Carbon filter is dirty, clean it. If the HEPA filter appears worn or clogged, replace it.
Why is there an increase in noise level in my Guardian AC4300?
If your Guardian Air Cleaner is making more noise than usual, the filters may be dirty. Check the filters and clean or replace them as needed.
General| Pre-filter | Yes |
|---|---|
| UV-C Light | Yes |
| Filter Replacement Indicator | Yes |
| Model | AC4300 |
| Type | Air Purifier |
| Filter Type | HEPA |
Captures initial dust and allergen particles.
Traps and controls household odors.
Enhances germ-killing by decomposing odor molecules.
Select a firm, level location and plug into a 120V AC outlet.
Turn on, select fan speed (1-3), and control UV-C mode.
Instructions on accessing and cleaning the combination filter.
