EasyManuals Logo

Guardian GG1000 User Manual

Guardian GG1000
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
1. Plug the unit into a 120V AC electrical outlet.
2. For best results continuous operation is recommended.
NOTE: THE PLUGGABLE UV-C AIR SANITIZER UNIT
CONTAINS NOSERVICEABLE PARTS EXCEPT ITS UV-C
BULB. THE BULB MAY BE REMOVED FOR REPLACEMENT.
DIRECTIONS FOR USE
WHEN TO CHANGE THE BULB
A replaceable 3.5 watt UV-C light bulb will last approximately 5000 hours.
Over time with use the UV-C bulb will lose some intensity approximately
15% at 4000 hours. Therefore it is suggested to replace the UV-C light
bulb approximately every 6 months (depending on use). You will know to
change the bulb when the light flickers continuously or changes colors.
Replacement bulb no. LB1000.
1. Unplug the unit from
the electrical outlet.
REPLACING THE UV-C BULB
2. Using a small Phillips
head screwdriver,
loosen and remove the
Phillips screw located
at the top backside of
the unit.
3. Remove the top cap by
lifting it off of the top of
the unit.
4. Place the unit on a table
or level surface in the
upright position.
5. Hold the unit in place
with one hand. Locate
the bulb and reach into
the cylinder.
6. With your opposite
hand, turn the bulb in
a counter-clockwise
direction (left) to loosen
from the socket.
7. Take new bulb and screw into unit using a clockwise motion.
8. Wipe off fingerprints wirh a dry cloth after
9. Reassemble by reversing steps 1-6.
E-3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Guardian GG1000 and is the answer not in the manual?

Guardian GG1000 Specifications

General IconGeneral
BrandGuardian
ModelGG1000
CategoryAir Cleaner
LanguageEnglish

Related product manuals