To Next PageTo Next Page
Need help?Do you have a question about the Guardian Temper Anchor Series and is the answer not in the manual?
General| Brand | Guardian |
|---|---|
| Model | Temper Anchor Series |
| Category | Security Sensors |
| Language | English |
Person with degree/certification & experience in fall protection system planning.
Assigned individual responsible for fall safety program, hazard identification, and stopping work.
Person assigned by employer to work near or be subject to fall hazards.
Use for fall arrest systems with max 1 PFAS connection, load limits specified.
Use for restraint systems to prevent reaching fall hazards; no free fall permitted.
Requirement for sufficient clearance below anchor to arrest fall safely.
Consideration and minimization of hazards associated with swing falls.
Ensuring connector compatibility to prevent roll-out and ensure secure attachment.
Specifies substrate thickness, roof pitch, and fastener types for secure installation.
Guidelines for attaching compatible Personal Fall Arrest Systems to the anchor point.
Mandatory periodic inspections by a Competent Person, including record-keeping.
Importance of assessing workplace conditions before selecting fall protection equipment.
Principles for designing and installing compliant fall protection systems.
Necessity of a pre-planned, project-specific rescue procedure for fall incidents.
