Gucbir D-300 - Page 27

22
11.4 OUTPUTS
The unit provides 2 relay and 4 semiconductor outputs. 2 of them have programmable funcons, selectable
from a list. Any funcon or alarm condion may be a digital output. Using two Relay Expansion Modules, the
number of relays may be increased to 22, 16 of them being volt-free contacts.
11.5 EVENT LOGGING
The unit records last 100 events with date-me stamp and a total of 18 measured parameters.
11.5 TELEMETRY AND REMOTE PROGRAMMING
The unit provides the user with large telemetry facilies via its standard RS-232 serial port, connecng either
to a PC, PLC or a GSM or PSTN modem. It supports both RAINBOW and MODBUS communicaon protocols.
The standard PC soware oers local and modem operaon capabilies as well as modem networking feature.
The PC program is used for below purposes:
parameter upload/download
remote monitoring and control
diagnoscs and analysis
Alternator voltage: 0 to 300 V-AC (Ph-N)
Alternator frequency: 0-100 Hz.
Mains voltage: 0 to 300 V-AC (Ph-N)
Mains frequency: 0-100 Hz.
V-A-cos Accuracy: 1.0% + 1 digit
kW-kVA-kVAr Accuracy: 2.0% + 1 digit
DC Supply Range: 9.0 to 33.0 V-DC
Cranking dropouts: survives 0 V for 100ms.
Typical Standby Current: 100 mA-DC
Maximum Operang Current: 200 mA-DC (Relay
outputs open)
Generator/Mains Contactor Relay Outputs: 16 A /
250V
DC Outputs: 1A @ 28V protected semiconductor
output
Charge excitaon: min 2 Was
Magnec pickup input:: 0.5 – 30 V-AC.
Magnec pickup frequency: 10 KHz max.
Current inputs: from CTs, .../5A. Max load 0.7VA
per phase.
Analog input range: 0-5000 ohms.
Serial port: RS-232, 9600 bauds, no parity, 1 bit stop
Operang temp.: -20
O
C (-4
O
F) to 70
O
C (158
O
F).
Storage temp.: -40
O
C (-40
O
F) to 80
O
C (176
O
F).
Maximum humidity: 95% non-condensing.
Dimensions: 172 x 134 x 46 mm (WxHxD)
Panel Cut-out Dimensions: 151x111 mm mini-
mum.
Weight: 340 g (approx.)
Case Material: High Temperature ABS/PC
(UL94-V0)
IP Protecon: IP65 from front panel, IP30 from
the rear
Installaon: Flat surface mounng on a Type 1
Enclosure. Rear retaining plasc brackets.
CE Conformity reference standards:
EN 61010 (safety requirements)
EN 61326 (EMC requirements)
UL / CSA Conformity: cercate # 20110527-
E314374
UL 508, Edion 17
UL 2200, 1st Edion.
UL 840 Edion 3
CSA C22.2 NO. 14 - Edion 10
11.5.1 TECHNICAL SPECIFICATIONS
Oil Pressure Sender
Coolant Temp. Sender
FUSE FUSE FUSE
Mains
Contactor
Generator
Contactor
MS








TETO
FUSE

Electricalnterloc

emoteMonitorin

andProramPort
FUSE
atter



Starter
Motor
Cran
Fuel


   
Oil Pressure
iTemperature
Emerenc Stop
Spare  Spare 
 
Fueleel Sender
Care
lt.

  
MPU
or


O




atterneatiemusterounded.
+
G
  
FUSE FUSE

OilTemp. Sender
 
Proramoc Coolant eel

ectiier Fail

nputOutput
EtensionPort
