What to do if the sharpening angle does not fit on Gude Power Tool?
If the sharpening angle doesn't fit on your Gude Power Tool, it's likely because the grinding disc is worn. The solution is to replace the disc.
General| Power | 1200 W |
|---|---|
| Saw Blade Bore | 30 mm |
| Bevel Angle | 0° - 45° |
| Dust Extraction | Yes |
| Idle Speed / No-load speed | 5000 rpm |
Identifies mechanical hazards and their protective actions.
Identifies electrical hazards and their protective actions.
Saw chain teeth can cause incisions. Wear protection gloves.
Loose clothing or jewels can be caught by rotating parts. Wear tight clothing.
Contact with rotating grinding disc causes injury. Never touch disc while in motion.
Defective cables/plugs cause shock. Replace defective cables/plugs by professional.
Prolonged work may cause hearing impairment. Wear ear protectors.
To Next Page
