What to do if the Gude GSS 400 Power Tool disc is burning?
If the disc is burning, it could be due to excessive lubrication on the sharpening surface or a worn diamond layer. To resolve this, first clean the unit with the sharpening tool. If the problem persists, replace the disc.
Details the components of the circular saw blade sharpener and its primary function.
Provides specifications for the circular saw blade sharpener, including power, dimensions, and weight.
Outlines qualifications and training needed for operating the machine safely and effectively.
Crucial safety guidelines to be followed before and during operation to prevent accidents.
Details mechanical, electrical, noise, material, human factors, and other hazards with protective measures.
Explains the various symbols used in the manual and on the unit for product safety and operation.
Guide for unpacking, assembling the saw blade, and initial setup of the sharpener.
Steps for configuring the adjustable arm, depth gauge, and performing the sharpening process.
Covers safety during maintenance and a schedule for regular inspections and cleaning of the unit.
Lists common troubles, their causes, and recommended troubleshooting steps for the sharpener.
Formal declaration by the manufacturer regarding the machine's compliance with EU safety directives.
Details the components of the circular saw blade sharpener and its primary function.
Provides specifications for the circular saw blade sharpener, including power, dimensions, and weight.
Outlines qualifications and training needed for operating the machine safely and effectively.
Crucial safety guidelines to be followed before and during operation to prevent accidents.
Details mechanical, electrical, noise, material, human factors, and other hazards with protective measures.
Explains the various symbols used in the manual and on the unit for product safety and operation.
Guide for unpacking, assembling the saw blade, and initial setup of the sharpener.
Steps for configuring the adjustable arm, depth gauge, and performing the sharpening process.
Covers safety during maintenance and a schedule for regular inspections and cleaning of the unit.
Lists common troubles, their causes, and recommended troubleshooting steps for the sharpener.
Formal declaration by the manufacturer regarding the machine's compliance with EU safety directives.
General| Voltage | 230 V |
|---|---|
| Frequency | 50 Hz |
| Protection class | II |
| Protection type | IP 20 |
| Saw blade diameter | 200 mm |
| Cable length | 2 m |
To Next Page
