Technical Data:
Watt A
Connection Current intensity Voltage/Frequency Engine output Tank volume Speed
IP
Weight Acoustic power level Protection type
ADDITIONAL SAFETY INSTRUCTIONS FOR GENERATORS
• Place the machine on asolid surface. Do not place the machine on a metal surface.
• Do not place the machine in the blazing sun. Do not expose the machine to temperatures over 40°C. Do not store the machine in
humid surroundings.
• Before use check whether the power input of the equipment to be connected is less than the maximum output ot the generator.
• Only connect the equipment when the generator is running at tull speed.
Disconnect the equipment before switching off the generator.
• Do not connect any other energy sources to the machine. 00 not connect the machine to mains supply.
• Immediately switch off the generator in one of the following situations:
-hitches or unstable running of the motor
-decrease of the electrical output
-overheating of the connected load
-excessive vibrating of the generator
-sparking
-presence of smoke or fire
• Make sure that the generator has enough fuel when connected to the load.
• Never add fuel when the machine is running. After use let the machine cool
down for at least 5 minutes before refuelling.
• Avoid touching hot parts of the machine.
• Do not store fuel near the machine.
• The sound absorber and the air filter function as flame catchers in Gase of after-burning. Therefore see to it that they are mounted
properly and are in good technical condition.
Description
This generator was designed to generate electricity to supply mains-supplied machines or equipment .
1 On/ off switch
2 Choke
3 Fuel cock
4 Start cord
5 Indicator lamp
7 Reset button alternating current output
9 Alternating current output
11 Lid fuel tank
fig. A
min
-
To Next Page
Loading...
