To set the calendar:
1. PULL out crown to B position.
2. TURN crown clockwise to correct date.
3. PUSH in crown to A position.
NOTE: The date changes automatically every 24 hours.
The stopwatch is capable of measuring:
1/1 second elapsed up to maxinum of 60 minute (top eye).
BEFORE USING THE STOP WATCH, reset the stopwatch hands to the 60 and 0 positions.
1. PULL crown to position C.
2. PRESS pusher A intermittently until the chronograph second hand is reset to 0.
1. PRESS pusher A to start timing.
2. PRESS pusher A to stop timing.
3. PRESS pusher B to reset.
1. PRESS Pusher A to start timing.
2. PRESS Pusher A to stop timing.
3. PRESS pusher A to restart timing.
4. PRESS Pusher A to stop 2nd timing.
5. PRESS Pusher B to reset.
To Next Page
Loading...
