USER MANUAL AND REGULATORY + SAFETY NOTICES
REGULATORY & SAFETY NOTICES
MANUALLY RE-PAIRING WATCH AND SMARTPHONE
If the connection between the smartphone app and the watch is disrupted, re-pair the watch
and smartphone as follows.
1. Tell your smartphone to “forget” the watch:
a. In your smartphone’s settings (not the GUESS CONNECT IQ+ app), view Bluetooth
®
devices.
b. Have your smartphone un-pair (“forget” or disconnect) your iQ+ watch.
c. Exit the Bluetooth
®
settings.
2. Re-pair (add, or connect) the watch to the smartphone’s Bluetooth
®
settings:
a. In your smartphone’s settings (not the GUESS CONNECT IQ+ app), view Bluetooth
®
devices.
b. On your watch, press crown for 5 seconds, which turns on Bluetooth
®
.
c. Select your iQ+ watch.
d. Exit the Bluetooth
®
settings.
VIEWING GOALS
Use the smartphone app to choose goals for steps or distance to be displayed on your
watch sub-dial. To view other goals on your watch’s sub-dial, gently pull crown out to
middle position.
SHOWING SECONDS, DATE, DISTANCE, STEPS
By default, the second hand shows seconds as on any analog watch. When the second hand
is set to show seconds, pressing the crown temporarily causes the second hand to point to
the current day of the month; for example, at 23 seconds past the minute, pressing the crown
would cause the second hand to point to 10 on the tenth day of the month. You can set the
second hand to show, instead of seconds, the number of steps, distance, or day of the month.
These settings are in the smartphone app.
ALARM
Set and turn on daily alarm on smartphone app. Sync to send alarm setting to watch. When
alarm sounds, night-light flashes on watch. Press crown to silence, If crown is
not pressed, alarm will sound for 20 seconds.
5
To Next Page
Loading...
