USER MANUAL AND REGULATORY + SAFETY NOTICES
REGULATORY & SAFETY NOTICES
COUNTDOWN TIMER
Set and start Countdown Timer on smartphone app. Sync to send to watch. Watch beeps and
night-light flashes when countdown ends. Press crown to silence, If crown is not pressed, alert
will sound for 20 seconds.
ADJUSTING STRIDE LENGTH
The GUESS CONNECT IQ+ uses an algorithm for distance measurement which automatically
determines your stride based on your height and speed. If you find the distance reported
does not match your actual walking or running distance, you can calibrate the distance by up
to +/- 25% via the smartphone app. You can do this through the distance-adjustment option
on the watch section of the app.
LOW BATTERY POWER
The watch indicates when you need to replace the battery:
• During synchronization of the watch with the smartphone, the app will alert you if the
battery needs to be replaced soon.
• The watch second hand will begin to move every 2 seconds in 2-second increments until
the battery is replaced.
• When battery power is low:
• The watch and smartphone will not communicate.
• The activity tracking functions will remain functional until the battery has been
completely depleted, but new data will not be stored.
REPLACING THE BATTERY
Before replacing the battery, it is recommended that you synchronize to the smartphone app
to ensure you have retrieved all of the latest activity and sleep data from the watch. After the
battery is replaced, the watch will need to be re-calibrated with the smartphone.
STORING THE WATCH
You may remove power from the watch for storage. To do this, pull the crown out to the
outer position. With the crown in this position, the hour, minute and second hands will stop
immediately, and the activity- and sleep-tracking functions will be inactive after 30 minutes.
6
To Next Page
Loading...
