Guest ChargePro10/10/10 - User Manual

09/17 A
Specifications subject to change without notice
Guest
®
ChargePro
™
Factory Service and Technical Support
15 Dartmouth Drive, STE 101
Auburn, New Hampshire 03032
603-433-4440
1-800-824-0524
www.chargepro.com
Made in China
Owner's Manual and Installation Guide
Model Number: Serial Number: Date of Purchase:
Conforms to UL STD. 1236
Certified to CSA STD. C22.2 No. 107.2
FCC Class B
Design and Constructed to ABYC A-31
5009218
CEC Listed
BC
For use with 12 Volt Flooded and AGM (Absorbed Glass Mat) Lead Acid Batteries. Not for 6 Volt Batteries.
Not for 4D and 8D large capacity batteries.
ON-BOARD MARINE BATTERY CHARGERS
Do not return this product to retailer or dealer for any service or warranty requirements.
Please call our Customer Care Department at 800-824-0524 from 8:30 am to 5pm
Eastern Time for any warranty, service or installation assistance.
Thank you - Guest
®
Customer Care
Your
Satisfaction
is Important
to Us!
IMPORTANT NOTICE
Please save and read all safety, operating and installation instructions before installing or applying
AC power to your Guest
®
ChargePro
™
On-Board Marine Battery Charger.
CHARGE PRO
TM
Model
Part No.
Volts
Amps
Per Battery
No.
Bat AC InCables Size
2708A ChargePro5 12 5 5 1 6' 7.5" x 2.4" x 7.2" 3.2 lbs 110-120V AC 50/60 Hz
2707A ChargePro4/4 12/24 4/4 8 2 6' 7.5" x 2.4" x 9.0" 4.5 lbs 110-120V AC 50/60 Hz
2710A ChargePro10 12 10 10 1 6' 7.5" x 2.4" x 9.0" 4.2 lbs 110-120V AC 50/60 Hz
2711A ChargePro5/5 12/24 5/5 10 2 6' 7.5" x 2.4" x 9.0" 4.7 lbs 110-120V AC 50/60 Hz
2713A ChargePro5/5/5 12/24/36 5/5/5 15 3 6' 7.5" x 2.4" x 12.9" 6.7 lbs 110-120V AC 50/60 Hz
2720A ChargePro10/10 12/24 10/10 20 2 6' 7.5" x 2.4" x 12.9" 6.6 lbs 110-120V AC 50/60 Hz
2731A ChargePro10/10/10 12/24/36 10/10/10 30 3 6' 9.0" x 4.11" x 8.7" 8.0 lbs 110-120V AC 50/60 Hz
2740A ChargePro10/10/10/10 12/24/36/48 10/10/10/10 40 4 6' 9.0" x 4.11" x 8.7" 8.5 lbs 110-120V AC 50/60 Hz
Weight
Total
Amps
Energy Saving
Technology
BC
2 Year
Warranty
100 %
Waterproof

Summary

FCC Class B Notification

Introduction

Important Safety Instructions

Crucial guidelines for safe operation and installation of the charger.

Safety Instructions

Grounding and AC Power Cord Connection

Detailed instructions on proper grounding and AC power cord connection.

Personal Precautions

Essential personal safety measures when working with batteries and chargers.

Preparing to Charge a Battery

Steps and precautions for preparing a battery before charging.

Charger Location & DC Connection

Guidelines for selecting an appropriate location and connecting DC cables.

General Overview

General Operation

Fully Automatic Multi-Stage Performance Charging Overview

Explanation of the 5-stage charging process and battery types supported.

Installation

Typical Wiring

ChargePro 5 and 10 Single Bank Charger for 1 12 V Battery

Wiring diagram for a single bank charger with one 12V battery.

ChargePro 4;4, 5;5 and 10;10 Dual Bank Charger for 2 12 V Batteries

Wiring diagrams for dual bank chargers with two 12V batteries.

ChargePro 5;5;5 and 10;10;10 Triple Bank Charger for 3 12 V Batteries

Wiring diagrams for triple bank chargers with three 12V batteries.

ChargePro 10;10;10;10 Quad Bank Charger for 4 12 V Batteries

Wiring diagrams for quad bank chargers with four 12V batteries.

Charging Your Batteries

Maintenance

Troubleshooting

No Blue AC Power LED or Charge Mode LEDs

Steps to diagnose and resolve issues when no power or mode LEDs are lit.

Red Battery Bank Trouble Status LED is ON

Troubleshooting common faults indicated by the red battery bank status LED.

Battery(s) not charging, Blue AC Power LED, RED Charging LED is ON

Steps to take when batteries are not charging despite power and charging LEDs.

Warranty

Guest ChargePro10/10/10 Specifications

General

Output Current	10A
Number of Banks	3
Battery Type	AGM, Gel, Flooded
Output Voltage	12V
Voltage	12V
Type	Marine Battery Charger