To Next PageTo Next Page
Need help?Do you have a question about the Guest ChargePro5/5/5 and is the answer not in the manual?
Batteries generate explosive gases during normal operation. Follow instructions carefully.
Charger is for LEAD-ACID batteries only; not for dry-cell batteries.
Do not operate if cable insulation or fuse holders are damaged; contact Guest for service.
Do not operate if charger has been dropped or damaged; contact Guest for service.
Do not disassemble; incorrect reassembly poses risk of shock or fire.
Unplug charger before maintenance or cleaning to reduce electric shock risk.
Instructions for proper grounding and AC power cord connection for safety.
Have someone nearby for aid when working near a lead-acid battery.
Keep soap, water, and baking soda available for battery acid spills.
Wear full eye, hand, and clothing protection to avoid injury.
Wash acid spills immediately; flood eyes with cold water for 15 mins if contact occurs.
Never smoke, create sparks, or flames near batteries or engines.
Be cautious not to drop metal tools on batteries to prevent sparks or fire.
Remove all metal jewelry before working near batteries to prevent burns.
Use charger only for LEAD-ACID batteries; not for dry-cell or low-voltage systems.
Never charge a battery that is frozen, damaged, or leaking.
Keep people, children, and pets away from batteries and charger during operation.
Steps to prepare batteries and the work area before charging.
When removing a battery, disconnect the grounded negative terminal first and turn off accessories.
Ensure the charging area is well-ventilated to prevent gas buildup.
Do not attempt to charge batteries other than specified 12V types or voltages.
Disconnect DC cables only after unplugging AC power to prevent sparks.
Ensure DC output cables do not touch each other to prevent short circuits.
Check AC power, GFCI, connections, and polarity. Contact service if issues persist.
Identifies faults like poor connections, blown fuses, reverse polarity, or low battery voltage.
Ensure battery voltage is over 4.0 VDC; consider load testing if low.
Check for incorrect series connections for 24V systems; refer to diagrams.
Confirm connections, polarity, and check DC voltage at each battery.
General| Brand | Guest |
|---|---|
| Model | ChargePro5/5/5 |
| Category | Marine Battery |
| Language | English |
