Why is my GUIDANCE MARINE CyScan AS Marine Equipment system tracking but no data is received at the DP system?
If the system is tracking but no data is being received at the DP system, verify the DP Feed connection from the sensor. Also, ensure that the DP Message Format matches the configuration of the vessel’s DP system.
What to do if my GUIDANCE MARINE CyScan AS system appears to be operational but no reflections are displayed?
If the system appears operational but no reflections are displayed within the CyScan Dashboard, make sure that the dynamic and static blanking zones are configured correctly. Clean the CyScan sensor window. Check whether there are any reflections listed on the Reflections menu and that the Zoom control on the main screen is set appropriately. Also, check that the Tilt controls and the Power controls on the Reflections menu are set appropriately. Finally, ensure that the Range Filters on the Reflections menu are set appropriately.
How to fix no communication between CyScan Dashboard and the GUIDANCE MARINE CyScan AS Marine Equipment Sensor?
To resolve the communication issue between the CyScan Dashboard and the sensor, try the following: Click the Disconnect button and then the Connect button. Check the power and client connections to the sensor. Ensure the unit displays the current time on the sensor information display; if errors are shown, power cycle the sensor. Finally, verify that the data feed converter is powered (yellow LED on) and that the outer transmit/receive lights are flashing once every couple of seconds.
What to do if my GUIDANCE MARINE CyScan AS system operates correctly but in cold weather loses targets?
If the system operates correctly but loses targets in cold weather, check for condensation or ice on the targets and the sensor window. Clean them if necessary.
Why doesn't the rotor rotate on my GUIDANCE MARINE CyScan AS Marine Equipment?
The rotor may not rotate due to several reasons: 1. The unit's temperature might be below -15°C. Ensure the temperature is above -15°C. 2. The Dashboard might be showing a 'Motor Stall' alarm. If so, suspend and then resume the unit to restart the motor. 3. There might be a mechanical blockage preventing rotation. Investigate and remove any blockage. 4. Check the sensor information display on the system unit for any errors. If errors are displayed, power cycle the unit and observe the messages on the display. 5. Ice build-up under the rotor can also prevent rotation. Remove any ice present.
Why is my GUIDANCE MARINE CyScan AS Marine Equipment system operational but is not tracking?
If the system is operational but not tracking, ensure that the sensor has a clear view of the targets and that the blanking zones are not blocking the targets from view. In the case of Multi-Target tracking, verify that a suitable set of targets has been selected.
Welcomes the user and outlines the guide's scope and the CyScan system's capabilities.
Details the CyScan system's components, including sensor, dashboard, and targets, and its overall function.
Illustrates the CyScan sensor unit, labeling its various parts for identification.
Provides step-by-step instructions for powering the CyScan system on and off safely.
Explains the main sections of the CyScan Dashboard screen, including BEV, Side Bar, and Menu Pane.
Details the function of various hotkeys available on the Dashboard for quick access to features.
Describes the Menu Pane's appearance and function for accessing information and controls.
Explains how to switch to and use the Coordinates Layout Mode for displaying positional data.
Describes how the system displays and interprets tracking information quality indicators.
Covers adjusting display settings like Day/Night mode and screen brightness for optimal visibility.
Explains how to set the vessel orientation in the Bird's Eye View for accurate situational representation.
Details the function and configuration of dynamic blanking zones to mask unwanted reflections.
Explains how to view and filter reflection data, including basic and extended reflection data.
Describes the scanner tilt mechanism, modes (Auto/Manual), and leveller angle adjustment.
Illustrates and explains the symbols used by the CyScan system for different target types.
Compares single and multi-target tracking, detailing their advantages, limitations, and operation.
Explains how to display target positions using Range/Bearing or coordinate axes.
Guides on selecting primary and secondary targets for multi-target tracking.
Details the procedure for aligning the multi-target heading based on a known reference.
Explains the functionality and limitations of a dashboard operating in monitoring mode.
Describes the features and operations available when a dashboard is in command mode.
Explains how to find and display serial numbers and software versions for support.
Details the DP feed, message formats, and how to view DP feed information.
Guides on enabling, using, and disabling manual power control for the CyScan sensor.
Explains how to export data logs from Ethernet-connected sensors and take screenshots.
Details the process of exporting data logs from serial-connected sensors.
Provides solutions for common communication and operational problems with the CyScan system.
Offers instructions on cleaning the optical window and reflective targets for optimal performance.
Details the location and specifications of the replaceable fuses within the CyScan system.
Describes the different types of targets (flat, cylindrical, prism) compatible with CyScan.
Provides guidelines and tips for the correct installation and positioning of targets.
Discusses operating conditions and technical considerations for the CyScan sensor in low temperatures.
Explains how to enable and use the on-screen keyboard for input without a physical keyboard.
Details how the system generates alarms, their severity, and how to filter them.
Explains how to view and modify network communication settings between the dashboard and sensor.
Lists the technical specifications for the CyScan AS system, covering sensor, interface, and weight.
Provides a record of document revisions, including changes and issue dates.
General| Laser Wavelength | 905 nm |
|---|---|
| Scan Speed | 10 Hz |
| Operating Temperature | -10°C to +50°C |
| Protection | IP66 |
| Housing Material | Aluminum |
| Type | Laser scanner |
| Laser Class | Class 1 |
| Scan Angle | 360 degrees |
| Power Supply | 18-32 V DC |
| Communication Interface | Ethernet |
| Beam Width | Not applicable |
To Next Page
