To Next PageTo Next PageWhy is my GUIDANCE MARINE CyScan AS Marine Equipment system tracking but no data is received at the DP system?
If the system is tracking but no data is being received at the DP system, verify the DP Feed connection from the sensor. Also, ensure that the DP Message Format matches the configuration of the vessel’s DP system.
What to do if my GUIDANCE MARINE CyScan AS system appears to be operational but no reflections are displayed?
If the system appears operational but no reflections are displayed within the CyScan Dashboard, make sure that the dynamic and static blanking zones are configured correctly. Clean the CyScan sensor window. Check whether there are any reflections listed on the Reflections menu and that the Zoom control on the main screen is set appropriately. Also, check that the Tilt controls and the Power controls on the Reflections menu are set appropriately. Finally, ensure that the Range Filters on the Reflections menu are set appropriately.
How to fix no communication between CyScan Dashboard and the GUIDANCE MARINE CyScan AS Marine Equipment Sensor?
To resolve the communication issue between the CyScan Dashboard and the sensor, try the following: Click the Disconnect button and then the Connect button. Check the power and client connections to the sensor. Ensure the unit displays the current time on the sensor information display; if errors are shown, power cycle the sensor. Finally, verify that the data feed converter is powered (yellow LED on) and that the outer transmit/receive lights are flashing once every couple of seconds.
What to do if my GUIDANCE MARINE CyScan AS system operates correctly but in cold weather loses targets?
If the system operates correctly but loses targets in cold weather, check for condensation or ice on the targets and the sensor window. Clean them if necessary.
General| Laser Wavelength | 905 nm |
|---|---|
| Scan Speed | 10 Hz |
| Operating Temperature | -10°C to +50°C |
| Protection | IP66 |
| Housing Material | Aluminum |
| Type | Laser scanner |
| Laser Class | Class 1 |
| Scan Angle | 360 degrees |
| Power Supply | 18-32 V DC |
| Communication Interface | Ethernet |
| Beam Width | Not applicable |
