1. Charge unit fully prior to each use.
2. Follow all instructions published by the battery manufacturer and the manufacturer of the
equipment in which the battery is installed.
3. Make sure the area around the battery is well-ventilated.
4. Never smoke or allow a spark or flame in vicinity of the engine or batteries.
5. Be careful not to drop a metal object on the battery or allow a metal tool to simultaneously touch
the positive and negative cable ends or battery terminals. It might spark or short circuit the battery
or other electrical parts and cause an explosion.
6. Remove personal metal items such as rings, bracelets, necklaces, and watches when working
with batteries. Batteries produce a short-circuit current high enough to weld a ring or other similar
objects to metal, causing a severe burn.
7. Someone should be within range of your voice, or close enough to come to your aid when you
work near batteries.
8. Have plenty of fresh water, soap and a supply of baking soda on hand in the area of the batteries
in case of contact with battery acid. Baking soda neutralizes lead acid battery electrolyte.
9. The product is supplied with a rechargeable, sealed lead acid battery. This battery is self-
contained and not consumer replaceable. Batteries must be disposed of properly when they no
longer hold a charge.
Operating Instructions
SPARK AND EXPLOSION HAZARD
Do not operate the booster pack in compartments containing batteries or flammable materials, or in
locations that require ignition-protected equipment.
Operating AC Appliances
The power pack has two AC power outlets for use with AC appliances. Follow these steps to operate
AC appliance:
1. Press the “ inverter” ON/OFF switch button to activate the AC outlets, you can see the AC outlet
icon on LCD screen and battery voltage and status. Make sure the battery is fully charged before
use.
2. Open the AC outlet plastic covers.
3. Plug the power cord of AC appliance into the AC outlet
4. Turn ON the AC appliance.
To Next Page
Loading...