23
CN GB RU DE FR
1. FOCUS RING
After the thermal imaging camera is turned on,
it shall be aimed at the target. When the distance
between the observation target changes, the image
may be blurred. Therefore, it is necessary to turn the
lens focus ring to refocus until the target image is
clear.
2. LENS COVER
Please cover the lens to protect the lens when the
product is not in use!
3. USB TYPE-C PORT
The external port with USB cable can be connected
to the external power supply to charge the product.
The output of the external power supply is 5V2A.
4. MICRO HDMI
Through the video cable of the external port, the
external power supply and the external screen can
be connected at the same time, and the image of
the thermal imaging camera can be output to the
external monitor for display. The image can be
displayed on the external screen or the screen of the
device.
To Next Page
Loading...
