Guild CAP110D-12 - Technical Data; Technical Data Table; NOISE; VIBRATION

11
Customer Helpline
0345 640 0800
Trouble Shooting
1. If the tool can not work, make sure the battery pack has power. If battery has run out of power,
please give enough time for battery pack to recharge properly. If the tool can not work with full
charged battery, clean battery contacts on tool, reinsert the battery pack according to its shape
(it should only fit one way), and press firmly until the battery pack locks in place.
2. If the tool can not work, check the car power supply plug if it's connect well with car cigarette lighter.
3. If a fault can not be rectified return the tool to an authorized dealer for repair.
Technical Data
Technical Data Table
NOISE
A weighted sound pressure L
pA
: 79dB(A)
A weighted sound power L
wA
: 88dB(A)
K
pA
& K
wA
=3.0dB(A)
Wear ear protection when sound pressure is over: 80dB(A)
VIBRATION
Vibration total values (triax vector sum) determined according to EN 60745:
Inflating
Vibration emission value a
h
= 2.1m/s
2
Uncertainty K = 1.5 m/s²
Model number
CAP110D-12
Model number
EBS0090A-1400400AB
Model number
CD304-12-BL
Motor voltage
12 V
Max. Pressure
8bar (116PSI)
Pressure range / accuracy
Weight (including battery and car plug)
1.22 kg
Car power supply cord length
2.7 m
Battery pack
Cordless Inflator
Type
Li-ion
Rated voltage
12V
Capacity
1300mAh
Charger
Input
100-240V ~50/60Hz
Output
14 V
0.4 A
Charging time
3-5 hours
0.2 - 8bar (3.0-116PSI) +/- 0.05bar (1.0PSI)