11
Maintenance
Remove the plug from the socket before carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrication or maintenance. There are no user
serviceable parts in your power tool. Never use water or chemical cleaners to clean your
power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place. Keep
the motor ventilation slots clean. Keep all working controls free of dust. Occasionally you
may see sparks through the ventilation slots. This is normal. If the supply cord is damaged,
it must be replaced by the manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
Technical Data
Voltage 230-240V~50Hz
Power input 850W
No load speed 120 - 380m/min
Belt size 76*533mm
Sanding size 76*140mm
Protection class
/II
Machine weight 3.51kg
Technical Data Table
A weighted sound pressure L
pA
: 92,1dB(A)
A weighted sound power L
wA
: 103,1dB(A)
K
pA
& K
wA
=3.0dB(A)
Wear ear protection
Noise Information
Vibration total values (triax vector sum) determined according to EN 60745:
Vibration emission value a
h
= 5,34m/s
2
Uncertainty K =1.5m/s²
Vibration Information
To Next Page
Loading...