7
38
NOTE: Before using the tool, read the instruction book carefully.
INTENDED USE
This tool is intended for dry sanding–with high removal capacity–of wood, plastic, metal,
filler as well as varnished surfaces.
1. ON/OFF SWITCH (SEE FIG A)
Press to start and release to stop your tool.
2. SWITCH LOCK-ON BUTTON (SEE FIG B)
Press on/off switch (8) then lock on button (3). Your tool is now locked on for continuous
use. To switch off your tool just depress and release the on/off switch.
Operating Instructions
A B
To Next Page
Loading...