EasyManua.ls Logo

Guild PRG500G - Technical Data

Guild PRG500G
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Customer Helpline 0333 3201989
13
Technical Data
Voltage
220-240V~50Hz
Power consumption 500 W
Nozzle size 2.5mm
Max air volume ow 600ml/min
Max viscosity 60DIN-s
Air hose length 1.8m
Tank capacity 800 ml
Spraying pressure
0.1-0.2bar
Protection degree
/II
Weight
1.82kg
Technical Data Table
A weighted sound pressure L
pA
:83dB(A)
A weighted sound power L
wA
: 94dB(A)
K
pA
& K
wA
=3.0dB(A)
Wear ear protection
Noise Information
Vibration total values (triax vector sum) determined according to EN 60745 & EN50580:
Vibration emission value a
h
= 2.687m/s
2
Uncertainty K = 1.5m/s²
Vibration Information
WARNING: The vibration emission value during actual use of the power tool can
differ from the declared value depending on the ways in which the tool is used
dependant on the following examples and other variations on how the tool is used:
How the tool is used.
The tool being in good condition and well maintained
Using the correct accessory for the tool and ensuring it is in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately
managed
WARNING: To be accurate, an estimation of exposure level in the actual conditions
of use should also take account of all parts of the operating cycle such as the times
when the tool is switched off and when it is running idle but not actually doing the job. This
may signicantly reduce the exposure level over the total working period.