Section 3
3-12
3.6. TITLE SCREEN
At power ON the 6675A will start it’s internal self-test programming and display its opening banner:
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
▒ ▄▄▄ ▄▄▄ ▄▄▄ ▄▄▄ ▄▄▄▄ ▒
▒ █ █ █ █ █ █ ▒
▒ █▄▄ █▄▄ █ █▄▄ █▄▄█ ▒
▒ █ █ █ █ █ █ █ █ ▒
▒ █▄█ █▄█ █ ▄▄█ █ █ ▒
▒ ▒
▒ AUTOMATED DCC RESISTANCE BRIDGE ▒
▒ <press any key to continue> ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
Pressing any key before the self-test routines have finished will remove the opening banner and
display a null instrument configuration where all parameters are initialized to zero. If no key is
pressed the opening banner will be automatically removed at the termination of the self-test routines.
The REMOTE DISPLAY screen will appear only when the 6675A has been addressed by a remote
communication device on the GPIB or RS232 port.
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
▒Status Line ▒
▒ ▒
▒ ▒
▒ ▒
▒ ▒
▒ ▒
▒──────────┬──────────┬─────────┬──────────▒
▒Remote │ │ │ ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
The only active soft function key that will work when in Remote mode is the function key <Fn-1>,
<Remote>. The exception is when local lockout has been enabled; in this case none of the keys on
the front panel will be enabled.
To Next Page
Loading...