Section 3
3-43
3.7.4.4.2.<Dacs> MENU Fn-2 (Diagnostic_Sofcal_MAIN)
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
▒Dac Settings ▒
▒DAC A(▒ 10V): ▒
▒DAC B(▒ 10V): ▒
▒DAC C(10V): ▒
▒DAC D(10V): ▒
▒ ▒
▒──────────┬──────────┬─────────┬──────────▒
▒DAC A │Set DAC │Ramp Off │ ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
DAC B Ramp On
DAC C
DAC D
Function key <Fn-1>, <DAC A> selects which DAC will be modified.
Function key <Fn-2>, <Set DAC> edits the value of the currently selected
DAC in <Fn-1>.
Function key <Fn-3>, <Ramp Off> enables or disables the automatic
ramping feature for the selected DAC.
3.7.4.4.3. <Diagnostic> MENU Fn-1 (Sofcal_MAIN)
Diagnostic menu selection page 2 of 4.
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
▒Set Internal Values ▒
▒Reading: Range: ▒
▒Turns: Mode: ▒
▒Sign: <Fn-1> Speed: ▒
▒milliAmps: <Fn-2> Cur Ramp: ▒
▒Volts: <Fn-3> Volt Ramp: ▒
▒──────────┬──────────┬─────────┬──────────▒
▒Sign │milliamps │Volts │MORE 2-4 ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
Function key <Fn-1>, <Sign> enables sets the direction of current flow and
the polarity of the voltage outputs.
To Next Page
Loading...