LATERAL TRIM SYSTEM
Lateral trim is achieved by the ailerons. An electrical trim actuator
mounted near the artificial feel system operates the ailerons through
the normal control system. The aileron travel, when operated by the
trim system, is 1/3 of full aileron travel.
Aileron trim is controlled by a switch located on the pedestal alongside
the rudder trim switch.
DIRECTIONAL TRIM SYSTEM
Directional (rudder) trim is accomplished by moving a trim tab on the
rudder. This tab is operated by two mechanically interconnected
electrical actuators, each protected by separate circuit breaker.
The rudder trim control switch is located on the pedestal alongside the
aileron trim switch.
Gulfstream G200 - Trim System
To Next Page
Loading...
