6
INSTALLATIONS
Attach The Seat to The Base
Backrest
Seat Cushion
Bolt
Armrest
Backrest
Lock-Latch
Frame
Armrest attachment here
Armrests, Seat Cushions Installation
Backrest anchor located on the
seat frame
Rod located on the bottom of
the Backrest
You may have to secure the seat frame on the base frame unit with nuts and bolts provided before installation of the backrest
Place the backrest on the anchors located on the seat frame with both ends of the rod sit securely on the anchors as shown.
Move the backrest slightly back and forth until a click-sound is heard and the lock-latch is closed properly to prevent the backrest
from moving forward.
To remove the backrest from the unit, release the lock-latch and pull the backrest upward from the anchors. Remove any obstruction
before pulling up the Backrest
Attach both armrests to the openings on the seat frame as shown, use the bolts provided to tighten the armrests.
Place the backrest cushion provided on the backrest and enclose with the zippers.
Close the bottom seat vinyl and attach the seat cushion onto the velcro.
To remove the armrests simply remove the bolts and pull out the armrests from the seat frame.
Bottom Seat Vinyl and Velcro
Backrest installation
Opening
Anchor the foot-spa by securing the screws provided as shown
onto the floor in four corners.
Screws
Adjustable Legs
To Next Page
Loading...
