INSTALLATION
2
Pop on the side clips.
3
Carefully press the rear corner clips to snap
onto the keyboard.
4
Align the device screen under the top
case’s side clips on both sides.
5
Slide the top case down, to secure the screen
behind the side clips, until the device reaches
the case’s top edge.
1
Align the device keyboard under the
bottom case’s front clips on both sides.
6
Press the lower side clips over the device,
with pressure from both sides, to snap
into place securely.
Congratulations on your new case!
GumdropCases.com
To Next Page
Need help?
General
