Gumdrop SlimTech - User Manual

INSTALLATION
2
Pop on the side clips. Make sure the keyboard is
flush against the front edge of the bottom case.
3
Carefully press the rear corner clips to snap
onto the keyboard.
4
Align the device screen under the top case’s
side clips on both sides.
5
Slide the top case down, to secure the screen
behind the side clips, until the device reaches
the case’s top edge.
1
Align the device keyboard under the bottom
case’s front clips on both sides.
6
Press the lower side clips over the device,
with pressure from both sides, to snap
into place securely.
Congratulations on your new case!
GumdropCases.com
SlimTech Lenovo Yoga 11e 6th Gen
7
Close the case and press on the clips located
on the bottom of the top case. Make sure the
clips are securely attached.

Summary

INSTALLATION

Align keyboard base

Align device keyboard under bottom case front clips.

Secure side clips

Pop side clips, ensuring keyboard is flush with bottom case front edge.

Attach rear clips

Press rear corner clips to snap onto the keyboard.

Align screen

Align device screen under top case side clips.

Slide top case down

Slide top case down to secure screen behind side clips to top edge.

Secure lower side clips

Press lower side clips over device, applying pressure to snap securely.

Close and attach clips

Close case and press bottom top case clips to ensure secure attachment.

REMOVAL

Unhook spine clips

Unhook 3 clips on top case bottom near the spine.

Release lower side clips

Push lower left/right side clips outward to release top case from device.

Slide off top case

Slide top case off by pushing up from bottom corners.

Unhook rear clips

Gently push rear clips down to unhook from device.

Release from bottom case

Push side clips down past device, one side at a time, to release from bottom case.

Gumdrop SlimTech Specifications

General

Brand	Gumdrop
Model	SlimTech
Category	Laptop Accessories
Language	English