Gusher 7550 Vortex Series - FOREWARD; WARRANTY; RECEIVING AND INSPECTION; RECEIVING

FOREWARD
THE DESIGN, CRAFTSMANSHIP, AND MATERIALS USED IN GUSHER PUMPS PROVIDES FOR
OPTIMUM PERFORMANCE AND LONG, TROUBLE-FREE SERVICE. AS WITH ANY MECHANICAL
DEVICE, PROPER USE AND PERIODIC MAINENANCE WILL ENHANCE THE PERFORMANCE AND
LIFE OF YOUR PUMP. THIS MANUAL IS PROVIDED AS A GUIDELINE FOR PROPER INSTALLATION,
OPERATION AND MAINTENANCE. THIS MANUAL MUST BE READ AND UNDERSTOOD BEFORE
INSTALLING AND OPERATING ANY PUMP.
GUSHER PUMPS INC. SHALL NOT BE LIABLE FOR PHYSICAL INJURY, DAMAGE OR DELAYS
CAUSED BY A FAILURE TO OBSERVE THE INSTRUCTIONS FOR INSTALLATION, OPERATION,
AND MAINTENANCE CONTAINED IN THIS MANUAL.
WARRANTY
GUSHER PUMPS INC. WILL REPLACE OR REAIR, WITHIN ONE YEAR OF SHIPMENT FROM OUR
PLANT, ANY PUMP IN OUR JUDGEMENT THAT HAS FAILED DUE TO DEFECTS IN MATERIALS OR
WORKMANSHIP, PROVIDED THE PUMP HAS BEEN PROPERLY INSTALLED AND MAINTAINED AND
HAS NOT BEEN SUBJECT TO ABUSE. THESE PUMPS MUST RETURN TO GUSHER PUMPS INC. WITH
COMPLETE HISTORY OF SERVICE FOR INSPECTION AND WARRANTY CONSIDERATION. GUSHER
PUMPS INC. DOES NOT ACCEPT THE RESPONSIBILITY FOR TRANSPORTATION TO AND FROM OUR
PLANT. FURTHERMORE, WE DO NOT ASSUME ANY RESPONSIBILITY FOR CONSEQUENTIAL
DAMAGE OR LOSS OF PRODUCTION.
WARRANTY IS ONLY VALID WHEN GENUINE GUSHER PARTS ARE USED.
SUPERVISION BY AN AUTHORIZED GUSHER REPRESENTATIVE IS RECOMEMENDED TO ENSURE
PROPER INSTALLATION. ADDITIONAL MANUALS CAN BE OBTAINED BY CONTACTING YOUR
LOCAL GUSHER REPRESENTATIVE OR BY CALLING 859-824-5001.
RECEIVING AND INSPECTION
THE UTMOST CARE HAS BEEN TAKEN AT THE
FACTORY TO ASSURE PROPER COUPLING
ALIGNMENT AND IMPELLER ADJUSTMENT.
HOWEVER, DUE TO CIRCUMSTANCES BEYOND
OUR CONTROL, YOU MUST INSPECT THE PUMP
UPON RECEIPT AND FOLLOW THE
INSTALLATION INSTRUCTIONS COMPLETELY
BEFORE START-UP.
RECEIVING
1. ROTATE SHAFT BY HAND. IF IT DOES NOT
ROTATE FREELY:
A. CHECK IMPELLER ADJUSTMENT.
B. CHECK FOR BENT COUPLING GUARD.
C. CHECK SLINGER (#12).
D. CHECK FOR BENT SHAFT (#1).
2. CHECK FOR CRACKED OR DAMAGED PARTS.
IF UPON RECEIPT, YOU FIND THE PUMP
DAMAGED, FILE A CLAIM WITH THE
DELIVERING CARRIER.
3. IF DRIVE MOTOR HAS BEEN SUPPLIED,
CHECK THE R.P.M. AND HORSEPOWER TO
BE SURE IT IS CORRECT AS ORDERED.
4. CHECK THE PUMP NAME TAG TO BE SURE
WE HAVE SHIPPED CORRECTLY AS
ORDERED:
A. MODEL NUMBER
B. HEAD IN FEET (FT. HD.)
C. GALLONS PER MINUTE (G.P.M.)
D. CONSTRUCTION:
1. ALL IRON.
2. ALL IRON WITH STAINLESS STEEL
SHAFT AND IMPELLER.
3. ALL STAINLESS STEEL.
5. IF THERE IS ANYTHING THAT APPEARS TO
BE INCORRECT, CALL THE FACTORY
IMMEDIATELY.