GW Instek APS-7050 - Page 67

REMOTE CONTROL
67
:OUTPut[:STATe]:TRIGgered
Set
Query
Description
Turns the output on/off when a trigger has been
generated.
Syntax
Query Syntax
:OUTPut[:STATe]:TRIGgered {<bool>|OFF|ON}
:OUTPut[:STATe]:TRIGgered?
Parameter/
Return parameter
OFF | 0
Turns the output off when a trigger is
generated.
ON | 1
Turns the output on when a trigger is
generated.
Example
The following example shows how to configure and
trigger the output trigger:
:SYSTem:CONFigure:TRIGger:INPut:SOURce NONE
:TRIGger:OUTPut:SOURce BUS (*TRG)
After you receive a trigger from the trigger source, you
can then turn the output ON/OFF:
:OUTPut[:STATe]:TRIGgered <bool>|OFF|ON
:INITiate[:IMMediate]:NAME OUTPut
Lastly send a *TRG or trigger input.