GW Instek APS-7050 - Recall a Sequence from Local Memory; Save a Sequence to Local Memory

APS-7000 Series User Manual
134
Save a Sequence to Local Memory
Saving a
Sequence
Sequence settings can be saved to one of 10
memory slots (SEQ0 ~ SEQ9).
Steps
1. Press Save[F3] and then long press a number
key when prompted.
2. A message will appear when the save is
successful.
Save
SEQ0 ~ SEQ9
Recall a Sequence from Local Memory
Recall a Sequence
Sequence settings can be recalled from one of 10
memory slots (SEQ0 ~ SEQ9).
Steps
1. Press Recall[F2] and then press a number key
when prompted.
2. A message will appear when the settings are
recalled successfully.
Recall
SEQ0 ~ SEQ9