Need help?Do you have a question about the GW Instek GDS-2204A and is the answer not in the manual?
General| Brand | GW Instek |
|---|---|
| Model | GDS-2204A |
| Category | Test Equipment |
| Language | English |
Explains symbols used for warnings and cautions in the manual and on the device.
Provides essential guidelines for safe operation and handling of the oscilloscope.
Details power requirements and the importance of proper grounding for electrical safety.
A step-by-step guide for initial setup and basic operation of the oscilloscope.
Covers fundamental operations for capturing and viewing input signals, including channel activation.
Details the Autoset function for automatically configuring the oscilloscope for optimal signal viewing.
Explains how to freeze or continue signal acquisition using the Run/Stop and Single Trigger modes.
Guides on adjusting the horizontal position and timebase (scale) of the waveform.
Guides on adjusting the vertical position and scale (volts/div) of the waveform.
Lists and defines the various automatic measurements available for voltage, current, time, and delay.
Details how to use horizontal and vertical cursors for measuring waveform parameters.
Explains how to perform mathematical operations on waveforms, including FFT and advanced math.
Explains different acquisition modes (Sample, Peak Detect, Average) and their usage.
Details how to adjust horizontal scale, position, and update modes for waveform viewing.
Guides on setting vertical scale, position, and coupling mode for each channel.
Provides an overview of trigger types and parameters like source, mode, coupling, and slope.
Details saving panel setups, waveforms, and images to internal memory or USB drives.
Guides on recalling default settings, waveforms, and setups from internal memory or USB.
Details the configuration of USB, RS-232C, and Ethernet interfaces for remote control.
Covers setting up and using the oscilloscope's built-in web server for remote access and control.
Provides instructions for calibrating the vertical accuracy of the oscilloscope.
Guides the user on how to compensate the oscilloscope probe for accurate measurements.
Addresses frequently asked questions and provides solutions for common operational problems.
Lists the technical specifications for different models of the GDS-2000A oscilloscope.
To Next Page