GW Instek GDS-320 - Page 16

Trigger
Source
Ch1 or Ch2
Trigger Mode
Auto, Normal, Single, Force
Trigger Type
Edge, Pulse width, Video,
Alternative
Trigger Holdoff
10ns - 10s
Coupling
AC, DC, LFR, HFR, NR
Sensitivity
DC - 25MHz: approx. 0.5div or
5mV
25MHz - 70/100/200MHz:
approx. 1.5div or 15mV
Horizontal
Range
5ns-100s/Div (1-2-5
increments)
Roll
100ms/div - 100s/div
Pre-Trigger
10 div max.
Post-Trigger
1,000 div max (depend on time
base)
Accuracy
±20ppm over any > 1ms time
interval
X-Y Mode
Phase Shift
±3° at 100kHz
Cursors and Measurement
Cursors
Voltage difference between
cursors(△ V), time difference
between cursors(△ T),
frequency measure(1/△ T)
Auto-measurement
36 sets
Auto-counter
6 digits. Range: 2Hz to rated
bandwidth
Autoset
Available
Probe Compensation
2V, 1kHz, 50% Duty cycle