Need help?Do you have a question about the GW Instek GPT-9801 and is the answer not in the manual?
General| Insulation Resistance Voltage Resolution | 1 V |
|---|---|
| AC Withstanding Voltage | 0.05 kV ~ 5.00 kV AC |
| DC Withstanding Voltage | 0.05 kV to 6 kV |
| Insulation Resistance Voltage | 0.05 kV ~ 1.00 kV DC |
| Ground Bond | 3.00 A ~ 30.00 A AC |
| Ground Bond Resistance | 0.001 Ω to 0.500 Ω |
| Ground Bond Resistance Resolution | 0.001 Ω |
| Display | LCD |
| Power Source | AC 100V/120V/220V/230V ±15%, 50/60 Hz |
| Output Voltage Range | 0.05 kV ~ 5.00 kV AC, 0.05 kV ~ 6.00 kV DC |
| Output Current Range | 3.00 A ~ 30.00 A AC |
| Frequency Range | 50 Hz / 60 Hz |
| Interface | RS-232 |
| Output Voltage | 0.05 kV ~ 5.00 kV AC, 0.05 kV ~ 6.00 kV DC |
| Output Current | Limited by Output Power, Ground Bond: 3.00 A ~ 30.00 A AC |
| Measurement Voltage | 0.05 kV to 5 kV (AC), 0.05 kV to 6 kV (DC) |
| Measurement Current | 0.5 mA to 20 mA |
Lists and defines safety symbols used in the manual and on the instrument.
Provides an overview of the GPT-9000/9000A series safety testers and their features.
Guides on connecting line voltage, powering up, and initial setup procedures.
Explains how to connect the GPT-9000/9000A to a DUT for various test types.
Details on creating, editing, and running manual ACW, DCW, IR, and GB safety tests.
Describes how to create, edit, and run automatic tests by linking manual tests sequentially.
Configures USB, RS232, and GPIB interfaces for remote control.
To Next Page
