Need help?Do you have a question about the GW Instek GPT-9804 and is the answer not in the manual?
General| Type | Safety Tester |
|---|---|
| Insulation Resistance Voltage Resolution | 1 V |
| Ground Bond Resistance Resolution | 0.001 Ω |
| Display | LCD |
| AC Withstand Voltage | 0.05 kV to 5 kV |
| AC Withstand Voltage Resolution | 1 V |
| DC Withstand Voltage | 0.05 kV - 6.00 kV |
| DC Withstand Voltage Resolution | 1 V |
| Insulation Resistance Voltage | 0.05 kV - 1.00 kV |
| Ground Bond Resistance Range | 0.001 Ω to 1 Ω |
| Power Source | 100 VAC to 240 VAC, 50/60 Hz |
| Output Voltage Range | 0.05 kV to 6 kV (DC), 0.05 kV to 5 kV (AC) |
| Frequency Range | 50 Hz / 60 Hz |
| Voltage Resolution | 1 V |
| Interface | RS-232, USB |
| Output Voltage | 0.05 kV to 6 kV (DC), 0.05 kV to 5 kV (AC) |
| Power Supply | 100 VAC to 240 VAC, 50/60 Hz |
Provides a general overview of the GPT-9000/9000A safety tester series.
Guides users through the initial setup and power-up process for the tester.
Explains how to connect the tester to power and turn it on.
Outlines essential safety precautions for the operating environment.
Lists important precautions to follow during the operation of the tester.
Explains how to connect test leads for ACW, DCW, IR, and GB tests.
Covers creating, editing, and running manual tests for ACW, DCW, IR, and GB.
Explains how to modify parameters for existing manual tests.
Details how to set the voltage or current parameters for a test.
Describes how to define pass/fail criteria for test results.
Provides steps for executing a configured manual test.
Covers creating, editing, and running automatic test sequences.
Explains how to modify parameters for existing automatic tests.
Provides steps for executing a configured automatic test sequence.
Details USB, RS232, and GPIB interface setup for remote control.
Explains the structure and rules for SCPI commands.
Provides a comprehensive list of available SCPI commands.
Lists and explains error messages that may appear during test operation.
Details the technical specifications for the GPT-9000/9000A series testers.
To Next Page
