GW Instek PEL-2000 Series Programming Manual

Programmable DC Electronic Load
PEL-2000 Series
PROGRAMMING MANUAL
GW INSTEK PART NO. 82EL-20040I01
ISO-9001 CERTIFIED MANUFACTURER
September 2009 edition
This manual contains proprietary information which is protected by
copyright. All rights are reserved. No part of this manual may be
photocopied, reproduced or translated to another language without
prior written consent of Good Will Corporation.
The information in this manual was correct at the time of printing.
However, Good Will continues to improve products and reserves the
right to change specifications, equipment, and maintenance
procedures at any time without notice.
Good Will Instrument Co., Ltd.
No. 7-1, Jhongsing Rd., Tucheng City, Taipei County 236, Taiwan.

GW Instek PEL-2000 Series Specifications

General

Models	PEL-2002, PEL-2004, PEL-2020, PEL-2024
Maximum Input Power (PEL-2002)	200W
Cooling Method	Forced Air Cooling
Channels	Single
Maximum Input Current (PEL-2002)	10A
Operating Modes	CC, CV, CP, CR
Display	LCD
Interface	USB, RS232
Output Voltage	0 ~ 500V
Voltage Resolution	1mV
Voltage Accuracy	±0.05%
Ripple and Noise (CV)	≤10mVrms
Load Regulation (CV)	±0.01%
Line Regulation (CV)	±0.01%
Operating Temperature	0°C to 40°C
Relative Humidity	20% ~ 80% RH
Input Voltage	AC 100V ~ 240V, 50Hz/60Hz
Power Factor	>0.95
Protections	Over Voltage, Over Current, Over Temperature, Short Circuit