Need help?Do you have a question about the GW Instek PEL-2000 Series and is the answer not in the manual?
General| Models | PEL-2002, PEL-2004, PEL-2020, PEL-2024 |
|---|---|
| Maximum Input Power (PEL-2002) | 200W |
| Cooling Method | Forced Air Cooling |
| Channels | Single |
| Maximum Input Current (PEL-2002) | 10A |
| Operating Modes | CC, CV, CP, CR |
| Display | LCD |
| Interface | USB, RS232 |
| Output Voltage | 0 ~ 500V |
| Voltage Resolution | 1mV |
| Voltage Accuracy | ±0.05% |
| Ripple and Noise (CV) | ≤10mVrms |
| Load Regulation (CV) | ±0.01% |
| Line Regulation (CV) | ±0.01% |
| Operating Temperature | 0°C to 40°C |
| Relative Humidity | 20% ~ 80% RH |
| Input Voltage | AC 100V ~ 240V, 50Hz/60Hz |
| Power Factor | >0.95 |
| Protections | Over Voltage, Over Current, Over Temperature, Short Circuit |
Provides instructions for installing load modules, GPIB cards, and rack mount kits for the PEL-2000.
Covers precautions, procedures, and considerations for connecting loads to the PEL-2000.
Overview of the three basic operating modes: CC, CR, and CV, and their configurable options.
Guide to creating and running programs using sequences for automated testing on the PEL-2000.
Explains how to create high-resolution load simulations using sequences for unique load profiles.
Steps for creating Program Sequences and Chains, including channel setup and saving.
Guide on creating accurate load simulations and testing multiple output power sources.
To Next Page
