GW Instek PEL-2000 Series - Power up & Self Test

GETTING STARTED
41
Power Up & Self Test
Panel operation
1. Connect the power cord
to the power socket.
2. Turn the external power
switch on.
3. Hold the power button
on the front panel to
turn on the power.
The power button turns
green from red (standby).
WARNING
Ensure that the power outlet has a ground socket. The
power outlet will have a ground connection if it is a 3
socket type.
Upon turning on, the Mainframe will perform a
self-test. The self-test checks the System, followed
by any attached channels.
All manuals and user guides at all-guides.com
all-guides.com