Important Safety Information
Safety Instructions
4
Read this First !
This
manual
contains
important instructions to follow during installation and maintenance of
Sunshine Grid Tie Inverter.
To reduce the risk of electrical shock, and to ensure the safe installation and operation of the
Sunshine Grid Tie Inverter, the following safety symbols appear throughout this document to
indicate dangerous conditions and important safety instructions.
WARNING!
This indicates a situation where failure to follow instructions maybe cause a
safety hazard or equipment malfunction. Use extreme caution and follow instructions
carefully.
NOTE:
This indicates information particularly important for optimal system operation.
Follow instructions closely
.
WARNING!
Be aware that the body of the Sunshine Grid Tie Inverter is the heat sink and can
reach a temperature of 80
℃
under extreme conditions. To reduce risk of burns, do not touch.
- Perform all electrical installations in accordance with all local electrical codes and the
National Electrical Code.
- Be aware that only qualified personnel should install and/or replace Sunshine Grid Tie
Inverter.
- Do not attempt to repair the Sunshine Grid Tie Inverter; it contains no user serviceable
parts.
If it failed, please contact Sunshine customer service to obtain a RMA number and start the
replacement process. Tampering with or opening the Sunshine Grid Tie Inverter will void the
warranty.
Before installing or using the Sunshine Grid Tie Inverter, please read all instructions and cau-
tionary markings in the technical description and on the Sunshine Grid Tie Inverter and the
PV-array.
To Next Page
Loading...
