GWS A-10 Thunder Bolt Warthog User Manual

DUCTED FAN SERIES AIRPLANE
"A-10" THUNDER BOLT
Thank you for choosing GWS DUCTED FAN SERIES
airplane "A-10". This airplane is fully scale, easy
control characteristic, and designed for advanced
and expert RIC fliers. We hope you will gain much
experience by flying the DUCTED FAN
"A-10" THUNDER BOLT and really enjoy it.
A-10
mmmmmA-ioimm °
o
Please read these instructions carefully and thoroughly before assembly in order to achieve
safe operation with maximum performance from your "A-10" flight

GWS A-10 Thunder Bolt Warthog Specifications

General

Power Source	Electric
Control	4 Channel
Skill Level	Intermediate
Brand	GWS
Model	A-10 Thunder Bolt Warthog
Type	RC Airplane
Material	Foam
Recommended Battery	11.1V 1300mAh Li-Po
Features	Scale look

Summary

Aircraft Specifications

Required Tools and Items

Radio Control System Components

Fuselage Assembly Instructions

Ducted Shroud Assembly Guide

Main Wing Assembly Steps

Horizontal Stabilizer and Vertical Fin Assembly

Ducted Fan Set Assembly

Radio Gear Installation and Wiring

Painting and Decals

Referential Painting Schemes

Provides sample paint schemes for the airplane.

Aircraft Decoration Part 1

Landing Gear and Center of Gravity (C.G.)

Power System Specifications

Aircraft Decoration Part 2

Radio Control Setup and Functions

Preflight Checking List

Take Off Procedures

Instructions for launching the airplane into the air.

Landing Procedures

Guidance on safely bringing the airplane back to the ground.