GWS Pico-J3-F User Manual

INDOOR AND OUTDOOR SLOW R/C FLYER
Thank you for choosing the GWS slow flyer" PIC0-J3-F " airplane kit. This airplane
has been designed for both Indoor and outdoor slow flying and Is especially suitable for
novice and advanced R/C fliers because of
minimal assembly time and easy flying
characteristics.
•
FOR 280 MOTOR VERSION .PLEASE READ A SUPPLEMENT IN ADDmON TO THIS
INSTRUCTIO!^.
Please read these Instructions carefully and thoroughly before assembly In order to
achieve safe operation with maximum performance from you PIC0-J3-F airplane.
MliiSHiHeclCiJii
http://www.gws.com.tw e-mail:export@gws.com.tw

GWS Pico-J3-F Specifications

General

Brand	GWS
Model	Pico-J3-F
Category	Toy
Language	English

Summary

Specifications and Kit Contents

Specifications

Details of the airplane's dimensions, power system, performance, and required radio.

Contents of Kit

A comprehensive list of all parts included in the PICO-J3-F airplane kit.

Optional Parts and System Requirements

Optional Parts

Information on optional parts available for improved performance and motor life.

Radio Control System

Lists required equipment for flying the airplane, including transmitter, receiver, servos, and ESC.

Tools and Items

Essential tools and materials needed for the assembly of the airplane.

Aircraft Assembly

Fuselage Assembly

Step-by-step instructions for assembling the main fuselage of the PICO-J3-F.

Battery Pack Holder

Instructions for attaching the battery pack holder to the fuselage.

Main Wing Assembly

Guidance on assembling the main wing, including joint preparation and dihedral angle.

Horizontal Stabilizer and Vertical Fin

Steps for attaching the horizontal stabilizer and vertical fin to the fuselage.

Main Landing Gear Installation

Instructions for installing the wheels and attaching the main landing gear.

Main Wing Mounting

Detailed steps for securely mounting the main wing to the fuselage.

Power System, Cowling, Propeller, and Spinner

Instructions for installing the indoor power system, cowling, propeller, and spinner.

Radio Gear and Control Linkage

Radio Gear Installation and Wiring

Guidance on connecting the receiver, servos, and electronic speed controller.

Servo Mounting

Instructions for properly mounting the servos inside the fuselage.

Control Linkage Setup

Steps for connecting the control horns and push rods to the servos.

Final Steps and Flight Preparation

Final Assembly and Adjustment

Completing the assembly, attaching struts, and adjusting wing angles.

Tips and Hints for Flight

Preflight checks, battery charging advice, and CG balancing.

Flight Operations

Instructions on how to properly turn on equipment and take off the airplane.

Safety Precautions

Important warnings for beginners and general safety guidelines during flight.