EasyManua.ls Logo

GYBER Alder - Page 3

GYBER Alder
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Before each use, completely loosen the power cord to ensure that the power cord is not
damaged.
Make sure to remove the plug after each use, when not in use, before cleaning and
placing, when the product is in error and during thunderstorms.
Pull out the power supply should focus on the plug, not the power cord.
The equipment shall not be modified without authorization.
Take out the maintenance should find a qualified business maintenance.
Do not barge the power cord without authorization.
If the power line is damaged, it is necessary to contact manufacturers, manufacturers
after sales or qualified businesses for repair.
Cannot connect external timer, or remote control device.
The product needs to be used in a grid environment with a leak trip switch less than
30mA. If you are not sure, consult a qualified electrician.
The appliance is to be connected to a socket-outlet having an earthing contact.
the supply cord should be regularly examined for signs of damage and the appliance is
not to be used if the cord is damaged.
If the power is cut off while using the equipment, follow the following steps:
1. Remove food from the grill.
2. Make sure no one touches the product. The case of the product will be very hot before it
cools down .
3. If power is lost for an extended period of time, unplug the plug, ventilate the room and
keep monitoring the product until it is completely cooled .
Risk of burns and scalds
Warning
There is a risk of burns. The shell of the product is in high temperature during use. Do not
touch it during use.
Care should be taken when placing or removing food. Use thick cloth or heat-resistant
gloves.
Do not place items such as rags or packaged food on or inside the product. There is a
risk of fire .
Do not leave during heating and cooling .
Overheated food or hot oil can cause a fire.
Allow product to cool completely before moving, cleaning and storing.
Both sides and upper part of the product for heat dissipation, the bottom for air intake.
The above holes should not be blocked, otherwise there is a risk of fire.
It is very hot above the heating tube during use, and there is a risk of burns if it is
touched.
Food should not touch the heating tube, otherwise the food will overheat and risk of
fire.

Related product manuals